Skip to content

Cups

The Vacuum CNC cups are the top piece of our vacuum block system. It will be in direct contact with the wood, keeping it fixed. Thanks to our cnc suction cups model (also called vacuum pods) with interchangeable parts, you can choose the perfect suction surface for each work. All our cups have the following advantages:

  • 360º rotation
  • The best vacuum clamping in the market
  • Changeable rubber
  • Easy uncoupling from the base
CA 120×120
CB 158×120
CV 120×158
CM 120×130
CC 145×145
CD 155×155
CG 132×132
CF 132×145
CJ 120×140
CL 160×150
CN 145×145

The “Vacuum-CNC System”

Division of the cnc suction cups in Base and Cup
In this image you can see how the cup can be placed over the base. The union of both completes the perfect cnc suction cup, more economical, more efficient, more comfortable and with a careful design.

Origins

Vacuum-CNC has been working throughout all these years in unifying in our brand all the clamping systems by vacuum for milling centres, from pod and rail machines to flat and grid tables.

The distinction

The main difference between our brand and others lies in the division of the cnc suction cups in two pieces (patented system). The Base is the inferior black part in contact with the milling center. Over the base we place the cup, the superior red part which holds the board or the piece to work out. As a result of this division we can offer you quite huge advantages:

The advantages

  • The suction area is easy and fast to change.
  • All the Vacuum CNC cups turn 360 degrees. They also stay fixed when turning on the vacuum.
  • It allows us to place elevators between the base and the cup. This makes it possible to work at many different heights, keeping always the same base and cup.
  • Furthermore, all of the vacuum cups have touch valve. Consecuently we can hold the vacuum block on the table even if they do not need to be used without losing vacuum.
  • It allows, in case of a broken cup or need of a new suction area, to replace only the cup, what leads to a significant economic saving.
  • The cups enclose the superior vacuum by a sealing rubber, very affordable and easy to replace. In other words, if it gets broken (until a 7 mm depth) we can fix the vacuum cup at 100% of its capacity simply by changing the damaged gum part.
  • Facilities for enterprises that have more than one mechanising centre with different vacuum cups. Thanks to our two-pieces system it could be studied the point of combining the heights. Above all, that will allow us to use the same cups in both milling centres. Sometimes it may be necessary to change the height in which it works, otherwise, the combination is not possible.
  • For the majority of models it exists the cup system with board lifter included. It exists for both formats, the vacuum system and the compact one.

If you have any doubt, please contact us.